22kW (127 cfm) BOGE Screw Compressor


22kW (127 cfm) BOGE Screw Compressor Specification Download PDF brochure.

  • Make : BOGE
  • Model : 22kW (127 cfm) BOGE Screw Compressor
  • Portability : Skid Mounted
  • Condition : New


BOGE C 30 screw compressor air cooled
Complete and ready to connect, fully automatic operation, with CE approval stamp

Maintenance friendly
– For routine inspection and maintenance the entire inside must be
easily accessible through large doors and removable sheeting in the cover
– Very simple maintenance through common access opening for oil separator cartridge
and high efficiency oil filter; valveless oil circuit
– This minimises your maintenance and service costs

Additional features
– Compressor unit isolated from mechanical vibration
– Motor protection IP 55 with PTC thermistors
– Integrated electrical switch cabinet (IP 54)
– Belt guard for safe operation
and protection of the V-belt from dirt ingress
– Constant low oil carry-over in all operating phases due to efficient
pre-separation in the integral compressed air-oil separator
– Compressed air aftercooler for low compressed air outlet temperatures
– No condensate in the oil due to thermostatically controlled oil cooler
– Powder coated surface, light blue, RAL 5012
Technical Data:
Effective free air delivery of complete unit
measured according to ISO 1217 Part C 3,62 m³/min
at maximum compressor overpressure 8,0 bar
Main drive motor nominal power 22,00 kW
Protection type / Insulation class of the motor IP 55 / F
Operating voltage (compressor) 400 V / 50 Hz
Control voltage (compressor) 24 V AC / 24 V DC
Cooling air flow volume (if connected to ducting) 3450,00 m³/h
Suction or ambient temperature (min...max) +5...+45 °C
Compressed air outlet temperature above ambient temperature 10 K
Residual oil content in compressed air < 3 mg/m³

super silenced version (according to dimensioned drawing): M 3200.0920
Unit sound pressure level (in accordance with DIN EN ISO 2151) 69 dB(A)
Width / Depth / Height 722 / 1060 / 1740 mm
Compressed air connection (ball valve) G 1
Weight 546,0 kg



Ask a question